Jeans Completed

So I decided I really didn't want to draw attention to the hem of the pants, so I went a different direction. I decided to use a decorative stitch on my machine to cover the faded mark from the previous hem.

I started with a sample on an old piece of muslin. Unless I'm just playing around, I always make a little sample. It is important to test your thread tension, stitch length, etc.

I also changed the needle on my machine. I just learned about Universal needles and how they were made to be used on both cotton fabrics and knits.  So I put in a Universal needle, in a size smaller than I usually use.

I used a dark navy blue thread.  I thought I might need a stabilizer, but these jeans are quite sturdy and elastic. I tried the decorative stitch on the very bottom of the jeans first, which ended up being folded up into the final hem.

Here is a comparison between the jeans before the stitch (L) and after (R).

The trickiest part of this process was not catching the underside of the pants while sewing.

For the final hem, I folded the raw edge under 1/4", then folded it in again 1/4" and pressed it with a hot iron.  Instead of using my sewing machine's blind hem stitch, I just sewed a straight stitch with the wrong side of jeans turned out so I could go along the edge of the turned under seam.

While I was reduxing these jeans, I wanted to fix one more issue.  I bought them with this strange button closure on the back, between the back belt loops. I guess you could use it to adjust the waist, but I didn't need it. It just made a wierd lump on my back. So I took it off!

The trusty seam ripper to  the rescue again!

Here's the finished product! You can see in the background that my hubby was watching The Incredible Hulk, when I interrupted him to take photos!

Hem: Auditioning Possibilities

I washed the jeans with the hopes that the old hemlines would relax a bit. I was disappointed to see that they did not relax at all. So I ironed them on high heat with steam and some starch alternative.

I love this product! It's so much less sticky than spray starch and it smells nice.

I went through my bin of trims. I didn't find a lot of possibilities (Christmas ribbon and rick rack wasn't doing it for me) but I did find a few.

For some reason, this reads "tennis" to me. Perhaps with something else, as an edging?

This was a belt from something....It reads a bit too "sailor suit" for my taste. Shirley Temple, I am not.

So I decided to audition a few fabrics from my quilting stash.
 

 Boring....

 I think the scale is too big on this one.

These two photos are the same fabric, just folded differently for different effects.

Maybe an autumn feeling?

Nah, but this print did make me think of a technique. It's a quilting technique but it would be really interesting. French braids!

I could use lots of interesting fabrics together and not be limited to just one. I hate having to choose just one of anything!

I shall have to choose carefully though. I could see how this look could quickly become too "hippy chick." Not that there's anything wrong with hippy chicks, I just don't care to dress like one.

My First Project: Altering a Hem

It's the curse of the tall woman: I had a pair of wide leg jeans in my closet that I never really wore because they were too short.

I have a bit of experience hemming things, from sewing a few garments.  So how hard can it be to rehem a pair of pants? Ok, they're not trousers. They're stretch denim jeans. But it still can't be that hard, right?

After a bit of examination, I can see that ripping out the hem seam will be a relatively simple process. The hardest problem is the very stretchy, thick elastic thread. I pull out my handy, dandy seam ripper. Do you own one of these? If not, you should.

All I did was run that bad boy around the whole hemline until all the stitches were loose.

So here they are, with the hem let out completely.  This adds about five inches of total length, more than enough to make them non-high-waters!

But look at that lovely line where the previous hem was turned and pressed . Hmmm, how to hide that? I will have to consider. Trim? Fabric ink or paint? Permanent marker?

Next installment: Putting in a new hem.